Panasonic WV-SP102 Security Camera User Manual


  Open as PDF
of 64
 
62
62
63
DependingontheOSinstalledonthePC,thefollowingmayoccur.Followtheinstructionsbelowwhenthefollow-
ing has occurred. By performing the following solutions, other applications and the security level may not be
affected.
The "Information Bar" expressed in the following symptom and solutions will be displayed just below the address
bar only when there is information to communicate.
Symptom Cause/solution
Reference
pages
The following message is dis-
played on the information bar.
"Pop-up blocked. To see this
pop-up or additional options,
click here…"
•Clicktheinformationbarandselect"AlwaysAllowPop-
upsfromThisSite…".Thedialogwindowsaying"Allow
pop-upsfromthissite?"willbedisplayed.Clickthe[Yes]
button.
−
The following message is
displayed on the information bar.
"This site might require the
following Active X control
'nwcv4Ssetup.exe' from
'Panasonic System Networks
Co.,Ltd.'. Click here to install..."
•Clicktheinformationbarandselect"InstallActiveX
Control". The "Security Warning" window will be displayed.
Click the "Install" button on the displayed "Security
Warning" window.
−
An unnecessary status bar or
scroll bar is displayed on the
pop-up window.
•Click"InternetOptions…"under"Tools"ofthemenubarof
Internet Explorer, and then click the [Security] tab. Click
"Internet" in the "Select a Web content zone to specify its
securitysettings:"section.Then,clickthe[Custom
Level…]buttontoopenthe"SecuritySetting"window.
Under "Miscellaneous", select "Enable" for "Allow script-
initiated windows without size or position constraints".
Clickthe[OK]button.Whenthewarningwindowisdis-
played, click the [Yes] button.
−
Images are not fit in the frames.
•When"120DPI"isnotselectedfor"DPIsetting",theymay
not be displayed correctly. Click the "Settings" tab on the
"Properties" window of "Screen" (in the control panel), and
then click the [Advanced] button. Change the "DPI setting"
to "Large size (120 DPI)".
−
Information Bar
 previous