Filter
Top Products
11.13 Configure the VIQS setting
Click the [Setup>>] button of “VIQS” on the [Image quality] tab of the “Image/Audio” page. (®page 92)
VIQS is an abbreviation of Variable Image Quality on Specified area and is a feature that enables you to change
the images of a specified area.
It is possible to enhance the image quality of the specified range within a shooting area (image).
It is also possible to moderate the image data size by lowering the image quality of other areas.
The VIQS setting is available only for H.264 images.
When checking the images after configuring the VIQS setting, display the H.264 images on the “Live” page.
[VIQS(H.264(1))]
Select “On” or “Off” to determine whether or not to activate the VIQS function for the transmitted (H.264(1))
images.
• Default: Off
[VIQS(H.264(2))]
Select “On” or “Off” to determine whether or not to activate the VIQS function for the transmitted (H.264(2))
images.
• Default: Off
IMPORTANT
• When the VIQS setting is activated and the setting value for “Aspect ratio” is changed from “4:3” to
“16:9” on the [JPEG/H.264] tab, make sure that the VIQS setting value does not exceed the maximum
designated range.
Operating Instructions 127
11 Configure the settings relating to images and audio [Image/Audio]