Filter
Top Products
8000-A2-GB30-10 November 2003 9
hdsl2ShdslPerfSESThresh This notification indicates that the
severely errored seconds threshold has
been reached/exceeded for the
HDSL2/SHDSL segment endpoint.
hdsl2ShdslEndpointCurr15MinSES,
hdsl2ShdslEndpointThreshSES
devLastTrapString
hdsl2ShdslPerfCRCanomaliesThresh This notification indicates that the CRC
anomalies threshold has been
reached/exceeded for the HDSL2/SHDSL
segment endpoint.
hdsl2ShdslEndpointCurr15MinCRCa
nomalies,
hdsl2ShdslEndpointThreshCRCanom
alies
devLastTrapString
hdsl2ShdslPerfLOSWSThresh This notification indicates that the LOSW
seconds threshold has been
reached/exceeded for the HDSL2/SHDSL
segment endpoint.
hdsl2ShdslEndpointCurr15MinLOS
WS,
hdsl2ShdslEndpointThreshLOSWS
devLastTrapString
hdsl2ShdslPerfUASThresh This notification indicates that the
unavailable seconds threshold has been
reached/exceeded for the HDSL2/SHDSL
segment endpoint.
hdsl2ShdslEndpointCurr15MinUAS,
hdsl2ShdslEndpointThreshUAS
devLastTrapString
hdsl2ShdslSpanInvalidNumRepeaters This notification indicates that a mismatch
has been detected between the number of
repeater/regenerator units configuredfor a
HDSL2/SHDSL line via the
hdsl2ShdslSpanConfNumRepeaters
object and the actual number of
repeater/regenerator units discovered via
the EOC.
hdsl2ShdslSpanConfNumRepeaters
devLastTrapString
hdsl2ShdslLoopbackFailure This notification indicates that an
endpoint maintenance loopback command
failed for an HDSL2/SHDSL segment.
hdsl2ShdslMaintLoopbackConfig
devLastTrapString
hdsl2ShdslpowerBackoff This notification indicates that the bit
setting for powerBackoff in the
hdsl2ShdslEndpointCurrStatus object for
this endpoint has changed.
hdsl2ShdslEndpointCurrStatus
devLastTrapString
hdsl2ShdsldeviceFault This notification indicates that the bit
setting for deviceFault in the
hdsl2ShdslEndpointCurrStatus object for
this endpoint has changed.
hdsl2ShdslEndpointCurrStatus
devLastTrapString
hdsl2ShdsldcContinuityFault This notification indicates that the bit
setting for dcContinuityFault in the
hdsl2ShdslEndpointCurrStatus object for
this endpoint has changed.
hdsl2ShdslEndpointCurrStatus
devLastTrapString
hdsl2ShdslconfigInitFailure This notification indicates that the bit
setting for configInitFailure in the
hdsl2ShdslEndpointCurrStatus object for
this endpoint has changed.
hdsl2ShdslEndpointCurrStatus
devLastTrapString
Table 1-4. Summary of Traps (3 of 7)
Trap Description VarBind(s)