Filter
Top Products
8000-A2-GB30-10 November 2003 37
5.5 DS1 MIB (RFC 2495)
5.6 Paradyne DS1-EXT MIB (PDN-DS1EXT-MIB).
This Paradyne MIB is an extension to the standard DS1 MIB (RFC 2495). This MIB
provides additional DS1 and G.703 (E1) configuration objects not provided by RFC 2495.
The various objects supported are shown in the following table.
5.6.1 pdnDs1ExtConfLineLengthType (RW):
This entry specifies the type of loop length for the interface. The posibble values are
shortHaul(1), longHaul(2). short-haul is intended for intra-building use. long-haul is
intended for inter-building use. The default value is long-haul.
5.6.2 pdnDs1ExtConfLineLength (RW):
This entry specifies the loop length, in feet, for a short-haul DS1 line. This object only
applies to DS1 interfaces. Note: This object shares a mutually exclusive relationship with
the pdnDs1ExtConfLineBuildOut object. Only one of the two can be used for configuration
at a time, based on the pdnDs1ExtConfLineLengthType object. The default value is
feet000To133.
Table 1-32. DS1 MIB
Table Comments
dsx1ConfigEntry Supported as is
dsx1CurrentEntry Supported as is
dsx1IntervalEntry Supported as is
dsx1TotalEntry Supported as is
dsx1ChanMappingEntry Supported as is
dsx1FarEndCurrentEntry Supported as is
dsx1FarEndIntervalEntry Supported as is
dsx1FarEndTotalEntry Supported as is
Table 1-33. DS1-EXT MIB
Table Comments
pdnDs1ExtConfTable Supported objects:
pdnDs1ExtConfLineLengthType
pdnDs1ExtConfLineLength
pdnDs1ExtConfLineBuildOut
pdnDs1ExtConfConnector