Filter
Top Products
8000-A2-GB30-10 November 2003 61
7.1.2.1.5 entPhysicalClass
An indication of the general hardware type of the physical entity.
Valid Object Value(s):
The following table shows the different classes identified for the ATM stackable DSLAM’s
entities.
7.1.2.1.6 entPhysicalParentRelPos
An indication of the relative position of this “child” component among all its “sibling”
components. Sibling components are defined as entPhysicalEntries --entries in the
entPhysicalTable-- which share the same instance values of each of the
entPhysicalContainedIn and entPhysicalClass objects..
Valid Object Value(s):
The following table shows the entPhysicalParentRelPos relationship among the entities.
Table 1-66. entPhysicalClass
Entity entPhysicalClass
Chassis chassis (3)
Container container (5)
Module module (9)
Splitter card module (9)
DSL Port port (10)
T1/E1 port port (10)
OC3 port port (10)
Console port port (10)
Ethernet Mgmt port port (10)
Temp Sensor sensor (8)
Fan fan (7)
PowerSupply powersupply (6)
Management Plane PLD other (1)
Table 1-67. entPhysicalParentRelPos (1 of 2)
Entity entPhysicalParentRelPos
Chassis -1
Container Position of this container in the chassis [1..20]
Module Position of this module in the slot container. Should be equal to 1
Splitter card 3
DSL Port A value between [1..24]