Filter
Top Products
8000-A2-GB30-10 November 2003 45
Write access to this object is not supported
6.1.1.10 “atmInterfaceMyNeighborIfName” Object (atmInterfaceConfEntry 12)
In Hybrid Management Model, the value of this object contains the textual name of the
interface on the neighbor system on the far end of this interface, and to which this interface
connects. If the neighbor system is manageable through SNMP and supports the object
ifName, the value of this object must be identical with that of ifName for the ifEntry of the
lowest level physical interface for this port. If this interface does not have a textual name,
the value of this object is a zero length string.
Write access to this object is not supported
6.1.1.11 “atmInterfaceCurrentMaxVpiBits” Object (atmInterfaceConfEntry 13)
The maximum number of VPI Bits that may currently be used at this ATM interface.
Table 1-48. atmInterfaceMyNeighborIpAddress
Interface atmInterfaceMyNeighborIpAddress Access
DSLATM 0.0.0.0 Read-Only
ATMUP 0.0.0.0 Read-Only
AAL5 0.0.0.0 Read-Only
Table 1-49. atmInterfaceMyNeighborIfName
Interface atmInterfaceMyNeighborIfName Access
DSLATM zero length string Read-Only
ATMUP zero length string Read-Only
AAL5 zero length string Read-Only
Table 1-50. atmInterfaceCurrentMaxVpiBits
Interface atmInterfaceCurrentMaxVpiBits
DSLATM 1
AT MU P 4
AAL5 6