Patton electronic 2113 Film Camera User Manual


 
13
4.0 OPERATION
Once the CopperLink-T T1/E1 Extenders are properly installed, they
should operate transparently. No user settings required. This section
describes reading the LED status monitors.
4.1 FRONT PANEL LED STATUS MONITORS
Models 2113 and 2115 feature three front-panel LEDs that monitor power,
Ethernet signals, and the CopperLink connection. Figure 5 shows the front
panel location of each LED. Table 1 describes the LED functions.
Figure 5.
CopperLink-T T1/E1 Extender front panel
Table 1:
Front panel LED description
LED Description
Power When lit, indicates the unit is powered on
Link
On solid—link is connected
Off—No signal detected
Flashing — Data is being transmitted/received
Frame
On solid—T1/E1 frame is connected
Off — No signal detected
Flashing — Error detected
Power
LED
CopperLink™-T
Link
LED
Frame
LED
T1/E1 Link Extender
Link
Frame
Power