Filter
Top Products
17
APPENDIX B
FACTORY DEFAULT DIP SWITCH CONFIGURATION
Note
This information is provided for informational purposes only.
These settings should not be changed other than by instructions
from Patton Support, lest the unit be rendered inoperable.
B.1 SWITCH S1 - FACTORY DEFAULT CONFIGURATION
B.2 SWITCH S2 - FACTORY DEFAULT CONFIGURATION
Table 3:
S1 Factory Default Dip Switch Configuration
Switch 2113/L/EUI 2113/R/EUI 2115/L/EUI 2115/R/EUI
Switch 1-1 ON ON ON ON
Switch 1-2 ON ON ON ON
Switch 1-3 ON ON ON ON
Switch 1-4 ON ON OFF OFF
Switch 1-5 ON ON OFF OFF
Switch 1-6 OFF OFF ON ON
Switch 1-7 OFF OFF ON ON
Switch 1-8 ON ON ON ON
Table 4:
S2 Factory Default Dip Switch Configuration
Switch 2113/L/EUI 2113/R/EUI 2115/L/EUI 2115/R/EUI
Switch 2-1 OFF OFF OFF OFF
Switch 2-2 OFF OFF OFF OFF
Switch 2-3 OFF OFF OFF OFF
Switch 2-4 OFF ON OFF ON
Switch 2-5 ON OFF ON OFF
Switch 2-6 OFF OFF ON ON
Switch 2-7 OFF OFF ON ON
Switch 2-8 ON ON ON ON