Filter
Top Products
14
4.2 CONFIGURATION AND DIP SWITCHES
The CopperLink-T™ T1/E1 Extenders are Plug ‘n’ Play enabled and do
not require any configuration by the user.
Note
The user
should NOT
change any of the dip switches except
for S1-7 (if necessary). If the user changes the position of any of
the dip switches (except for S1-7), it
will affect
the operation of
the unit. Refer to Appendix B on page 17 for the factory default
dip switch configuration.
Switch S1-7: Line Build Out
Switch S1-7 defines the shape of the waveform on the T1 or E1 line.
Table 2:
S1-7 Default Position
Switch 2113/L/EUI 2113/R/EUI 2115/L/EUI 2115/R/EUI
S1-7 OFF (120) OFF (120) ON (0.0dB) ON (0.0dB)