Filter
Top Products
C1572M (9/05) 13
UNPACKING
Various items are supplied with the CM9700-CC1 and with the CM9760-MXB. Refer to the
Unpacking the CM9700-CC1
and
Unpacking the
CM9760-MXB
sections for a list of items supplied with the units.
UNPACKING THE CM9700-CC1
The following items are supplied with the CM9700-CC1:
1 CM9700-CC1 unit, with front rack ears installed
1 120 VAC, 60 Hz power cord (USA standard)
1 230 VAC, 50 Hz power cord (European standard)
1 Keyboard, PS/2
1 PS/2-to-AT keyboard adapter
1 BNC extraction tool
2 Brackets with a set of 6 screws, 8-32 x 0.250-inch, pan head
2 Adjustable support rail sets (each set includes 1 front-mounting rail and 1 rear-mounting rail) and the following sets of screws:
6 Screws, 8-32 x 0.375-inch, pan head with washers
12 Screws, 10-32 x 0.375-inch, flat head
4 Screws, 10-32 x 0.750-inch, Phillips, pan head with washers
6 Screws, 8-32 x 0.250-inch, Phillips, pan head
UNPACKING THE CM9760-MXB
The following items are supplied with the CM9760-MXB:
1 CM9760-MXB matrix bay, with front rack ears installed
1 Power cord:
– For the CM9760-MXB: 120 VAC, 60 Hz power cord (USA standard)
– For the CM9760-MXB-X: 230 VAC, 50 Hz power cord (European standard)
1 RJ-45 reversed data cable
8 Screws and washers for mounting the bay
1 Sheet of video input number labels that can be affixed to the rear panel BNC cards to correspond to video input numbers
In addition, one CM9760-VMC video output card, the appropriate number of CM9760-VCC video input cards, associated rear panel cards, and up
to two power supplies are installed in the matrix bay according to your system order.
NOTE:
If the matrix bay is shipped with two power supplies installed, then two 120 VAC or 230 VAC power cords are supplied.