Filter
Top Products
Pelco Manual C1917M (12/97) 15
6.0 TROUBLESHOOTING
The following conditions that may be observed when using a CCD camera are not
associated with any fault of the camera.
Vertical Smear
This phenomenon occurs when shooting a very bright object.
Patterned Noise and Blemish
This is a fixed pattern which may appear over the entire monitor screen when the
camera is operated at a high temperature.
Jagged Picture
When shooting stripes, straight lines, or similar patterns, the image on the screen
may appear jagged.
Camera Does Not Operate
The only service you can perform on the camera is to inspect and change the
fuse. To check the fuse, remove the upper cover. If the fuse is bad, replace it with
the same type of fuse rated at 125 VAC, 500 mA. If the fuse blows after replacing
it, or if there are other problems with the camera, return the camera to Pelco for
servicing.