Filter
Top Products
2 Pelco Manual C1917M (12/97)
1.2 REGULATORY NOTICES
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Op-
eration of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own ex-
pense.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
This device requires shielded interface cables to comply with FCC emission limits.
1.3 UNPACKING INSTRUCTIONS
Unpack and inspect all parts carefully.
The following parts are supplied:
1 Camera
1 4-pin plug for lens cable
1 Installation/Operation Manual (C1917M)
Be sure to save the shipping carton and any inserts. They are the safest material in
which to make future shipments.
If an item appears to have been damaged in shipment, replace it properly in its
carton and contact the factory at 1-800-289-9100 or 1-559-292-1981 for a replace-
ment. (International customers fax 1-559-348-1120 for authorization and instruc-
tions.)
If an item needs to be returned to the factory for repair, consult the WARRANTY
AND RETURN section of this manual for instructions.
1.4 RECOMMENDED TOOLS
Pelco does not supply basic tools needed for the installation process. The following
tools are recommended:
Small flat and Phillips screwdrivers
Coaxial cable stripper
BNC crimp tool
If you will install an auto-iris lens:
Soldering iron
Wire cutter
Wire stripper