Pelco c2462m-e Camera Accessories User Manual


 
C2462M-E (3/09) 15
Camera Adjustments
SWITCH SETTINGS
FIXED FOCAL LENGTH LENS WITHOUT AUTO IRIS
Refer to the switch drawing. The switch is located next to the lens. Automatic backlight compensation
(factory setting) is used under varying lighting conditions (such as outdoors) or fixed lighting conditions
where there are no bright spots that darken other picture details. Manual backlight compensation is used
in fixed lighting conditions, to optimize the picture detail when there are bright spots.
ALC/
ELC switch: Always ELC
Y/DC switch: Not used
A
uto backlight compensation: BLC switch OFF; ABL switch ON
Figure 10. ICS090 Series Switch Settings
Ma
nual backlight compensation: BLC switch ON; ABL switch OFF
NOT USED
= SWITCH POSITION
FACTORY SETTINGS
ALC
Y
BL
ABL
ELC
DC
OFF
OFF
ON
OFF