Pelco c2462m-e Camera Accessories User Manual


 
18 C2462M-E (3/09)
Install Liner and Bubble
DOME LINER INSTALLATION
If the unit is supplied with a dome liner, reinstall the liner before installing the dome bubble (refer to
Figure 13):
1. Align the studs located on the camera module with the clips on the liner.
2. Lightly pinch the sides of the liner, opposite from the
clips, and place the clips over the studs.
3. When the liner is secure, position the viewing window
of the liner over the lens of the camera.
Figure 13. Installing the Dome Liner
4. Install the bubble (refer to Dome Bubble Installation on page 19).