Filter
Top Products
32 C3426M-D (3/08)
Specifications
GENERAL
Pan/Tilt Adjustment Manual
Pan 360°
Tilt 80° (20° to 100° range)
Rotation 360°
Construction Aluminum with steel camera mounting bracket and polycarbonate
dome
Cable Entry 1, 0.75-inch (1.91 cm) NPT threaded opening on side;
2, 0.75-inch (1.91 cm) openings on base
Finish Gray polyester powder coat
Light Attenuation
Smoked f/1.5 light loss
Clear Zero light loss
Unit Weight 2.2 lb (1.0 kg)
ELECTRICAL
Input Voltage* 12 VDC or 24 VAC (±10%), autosensing
Synchronization Internal or AC line lock
Power Consumption
Camera <3 W (DW/CW models)
<4 W (DN/CH models)
Heaters 10 W when active, thermostatically controlled
*24 VAC power is recommended when installing any Camclosure integrated camera system under
fluorescent lighting conditions.
VIDEO
Signal System NTSC or PAL
Video Output
Composite 1 Vp-p (75 ohms)
UTP 1 Vp-p (100 ohms)
Video Connectors 1 composite BNC and 1 UTP
Service Connector 3-conductor, 2.5 mm connector for video output to optional IS-SC
cable
ENVIRONMENTAL
Environment Low temperature, indoor/outdoor
Operating Temperature -50° to 122°F (-46° to 50°C); de-ices to 25°F (-4°C)
Thermostat Operation Heater is thermostatically controlled to activate ON at 50°F
(10°C) and OFF at 80°F (27°C)
CAMERA/LENS
If you need technical specifications for the camera itself, refer to the IS110 specification online at
www.pelco.com.
(Design and product specifications subject to change without notice.)