Filter
Top Products
22 Pelco Manual C540M (6/98)
5.0 ADVANCED OPERATION
5.1 PRESET CAMERA POSITIONS
A preset camera position is a set of parameters which define pan, tilt, zoom and
focus adjustments. A preset camera position can be recalled as follows:
1. Manually, using the CM9760 keyboard
2. Automatically as the result of an alarm condition (refer to the 9760 alarm file)
3. From a macro command
5.1.1 Recalling Presets
1. Using the keypad, enter the preset number.
2. Select or press .
5.1.2 Creating Presets
1. Display the
define
sub-menu by selecting from the
default
menu.
2. Enter your four-digit
define
PIN.
3. Using the joystick and
camera control
keys, set up the camera preset re-
quired.
4. Using the keypad, enter a preset number between 1 and 99.
5. Select .
6. Select to revert to the
default
menu.
5.1.3 Deleting Presets
1. Display the
preset
sub-menu by selecting on the default menu, or by
pressing .
2. Using the numeric keypad, enter the number of the preset that you wish to
delete.
3. To delete the preset, select .
4. Select to revert to the
default
menu.
NOTE:
Presets are only possible
when receiver/drivers, zoom lenses
and/or pan/tilt heads are fitted with
preset facilities.
NOTE:
Your define PIN need only
be entered once during operation.
The default PIN is 1234. To alter the
define PIN, see Section 3.0, Installa-
tion and Setup.