Filter
Top Products
4 C3453M-C (5/09)
Description
The EH1512 Series indoor/outdoor enclosures are designed for use with small- to medium-sized analog and IP cameras. They will accommodate
both fixed and variable focal length lenses (with or without auto-iris operation). They can be wall mounted using either Pelco’s EM1512
(feedthrough wall mount) or any light to medium duty mount.
The tethered, removable enclosure lid provides easy access during installation and when camera and lens adjustments are necessary. Power and
video cabling is brought into the enclosure through two adjustable glands (PG9 and PG11) on the bottom of the enclosure, allowing for easy
installation.
Field-installed options include a heater/blower or blower with a 24 VAC camera power supply and sun shroud. The enclosures can also be
ordered from the factory with a 24 VAC, 120 VAC, or 230 VAC heater/blower or blower with a 24 VAC camera power supply. If your enclosure has
a thermostatically controlled heater, the thermostat is set to turn on at 50°F (10°C) and turn off at 80°F (27°C). The blower operates continuously.
An optional security kit that prevents opening the enclosure is available.
NOTE: A metric Allen wrench (5 mm) and a Phillips screwdriver are required for installation but are not included. A flat head screwdriver might
also be needed for all models except the EH1512 and EH1512MT. The Allen wrench is needed to secure the enclosure to all mounts. It is also
needed to open and close the enclosure and to secure the pan/tilt (swivel head) on the EM1512 mount.
MODELS
EH1512 Enclosure, indoor/outdoor.
EH1512MT Same as EH1512 with an EM1512 feedthrough wall mount.
EH1512-1 Same as EH1512 with a 120 VAC heater/blower with 24 VAC camera power (includes the 4-inch wire tie); 12 W enclosure
power consumption*; 25 W maximum power consumption capacity.
EH1512-2 Same as EH1512 with a 24 VAC heater/blower with 24 VAC camera power; 12 W enclosure power consumption*.
EH1512-3 Same as EH1512 with a 230 VAC heater/blower with 24 VAC camera power (includes the 4-inch wire tie); 12 W enclosure
power consumption*; 25 W maximum power consumption capacity.
EH1512-1MT Same as EH1512 with a 120 VAC heater/blower with 24 VAC camera power and an EM1512 feedthrough wall mount
(includes the 4-inch wire tie); 12 W enclosure power consumption*; 25 W maximum power consumption capacity.
EH1512-2MT Same as EH1512 with a 24 VAC heater/blower with 24 VAC camera power and an EM1512 feedthrough wall mount; 12 W
enclosure power consumption*.
EH1512-3MT Same as EH1512 with a 230 VAC heater/blower with 24 VAC camera power and an EM1512 feedthrough wall mount
(includes the 4-inch wire tie); 12 W enclosure power consumption*; 25 W maximum power consumption capacity.
EH1512-1MTS Same as EH1512 with a 120 VAC heater/blower with 24 VAC camera power, an EM1512 feedthrough wall mount (includes
the 4-inch wire tie), and an SS1512 sun shroud; 12 W enclosure power consumption*; 25 W maximum power consumption
capacity.
EH1512-2MTS Same as EH1512 with a 24 VAC heater/blower with 24 VAC camera power, an EM1512 feedthrough wall mount, and an
SS1512 sun shroud; 12 W enclosure power consumption*.
EH1512-3MTS Same as EH1512 with a 230 VAC heater/blower with 24 VAC camera power, an EM1512 feedthrough wall mount (includes
the 4-inch wire tie), and an SS1512 sun shroud; 12 W enclosure power consumption*; 25 W maximum power consumption
capacity.
*Enclosure power consumption does not include camera wattage.