Filter
Top Products
C307M-K (11/07) 13
Operation
POWER-UP DISPLAY
When the system is powered up, the selected protocol, revision number, and other information is displayed on the monitor. For example, the
screen might show the following information:
The information displayed depends on the selected protocol (C, D, or P) and the menu selection for power-up
mode. (Refer to Power-Up Mode on page 44).
The information remains on the monitor until the system is moved.
HOW TO OPERATE YOUR SYSTEM
*Optical zoom magnifies the image and the picture remains clear. Resolution is constant.
†
Digital zoom magnifies the image and the picture may appear pixelated. The larger the zoom limit, the greater the reduction in resolution.
Operation How to Control
Pan and Tilt Move joystick left/right and up/down.
Scanning
Stop scan
Random scan
Frame scan
Auto scan
Call preset 96.
Call preset 97.
Call preset 98.
Call preset 99.
Zoom Far To zoom far, do the following:
1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the optical zoom* limit.
2. Release the button or joystick.
3. To continue zooming (digitally), immediately press the button or turn the joystick clockwise again until you have
the picture you want or reach the digital zoom
†
limit.
Zoom Wide Press the Zoom Wide button or turn the joystick counterclockwise.
Presets Refer to the documentation supplied with the controller.
Patterns Refer to the documentation supplied with the controller.
ESPRIT 16X IOP 1.0h
CONFIGURE DONE
D Address 1
P Address 2
Comm 2400, N, 8, 1
CAMERA XXXX-XXXX