Filter
Top Products
10 Pelco Manual C535M-B (8/98)
4.0 OPERATION
The MPT9500 operates in one of three modes: Coaxitron
®
Standard (15-bit proto-
col), Coaxitron
®
Extended (32-bit protocol) and RS-485. Which mode is usable de-
pends upon receiver configuration; however, upon power up or reset the transmitter
will wake up in the default Coaxitron
®
“extended commands” mode. The keyboard
display will indicate “EXT CXTRN” when in this mode.
Default keyboard display
EXT CXTRN
PRESET
GO
PRESET
SET
IRIS
OPEN
IRIS
CLOSE
PAN
AUTO
PAN
MAN
FOCUS
NEAR
FOCUS
FAR
CAMERA
OFF
CAMERA
ON
ZOOM
TELE
ZOOM
WIDE
F1 1 2 3
F2 4 5 6
F3 7 8 9
AUX CLEAR 0 SELECT
ALARM
ACK
COAX
RECV
RECV
ADDRS
ZONE
Figure 7. MPT9500 Layout of Operating Controls & Functions
KEYBOARD
DISPLAY
PTZ CONTROL
KEYS
TURBO
BUTTON
PROGRAMMING &
FUNCTION KEYS
Figure 6. MPT9500 Keypad Layout
Normal pan/tilt and lens functions will operate by pressing the appropriately labeled
buttons on the keypad. In general, operation and control functions of receivers are
actuated by the grouped keys on the left side of the keyboard while programming
functions utilize the grouped keys on the right side of the keyboard. Refer to Figure
6 and Figure 7 for keypad layout and keyboard control descriptions respectively