Filter
Top Products
224
11
Appendix
Cleaning the CMOS Sensor
If the CMOS sensor becomes dirty or dusty, shadows may appear in the
image in certain situations such as when shooting against a white
background. This indicates that the CMOS sensor must be cleaned.
Shaking the CMOS sensor removes dust that has collected.
1
Select [Dust Removal] in the [R Set-up 3] menu, and press
the four-way controller (5).
The [Dust Removal] screen appears.
2
Press the 4 button.
The Dust Removal function is activated
by shaking the CMOS sensor.
To activate the Dust Removal function
every time the camera is turned on and
off, set [Start-up Action] and [Shut-down
Action] to O.
When Dust Removal is completed, the camera returns to the [R Set-up
3] menu.
Removing Dust by Shaking the CMOS Sensor
(Dust Removal)
Use a brush-less blower to remove dirt and dust from the CMOS sensor. Using
a blower with a brush may scratch the CMOS sensor. Do not wipe the CMOS
sensor with a cloth.
Dust Removal
Dust Removal
Dust Removal
Dust Removal
Start-up Action
Start-up Action
Shut-down Action
Shut-down Action
MENU
Start
Start
OK