Filter
Top Products
174
Editing Images
7
Developing RAW Images
You can convert captured RAW images into JPEG images, and save them
as a new file.
1
Press the four-way controller (3) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select h (RAW
Development), and press the 4 button.
The screen to select a development method is displayed.
3
Use the four-way controller (23)
to select [Developing a Single
Image], and press the 4 button.
The parameters recorded in the image file
appear.
Proceed to Step 6 if you do not need to
change the parameters.
If there are no images that can be processed, [No image can be
processed] appears.
4
Use the four-way controller (23)
to choose a parameter you want
to change.
You can select a different image by
turning the e-dial.
Only RAW images captured with this camera can be developed. RAW images
captured with other cameras cannot be developed on this camera.
Developing One RAW Image
Developing Multiple Images
Developing Multiple Images
Developing a Single Image
Developing a Single Image
MENU
OK
OK
OK
Image Capture Settings
Image Capture Settings
OK
MENU
100-0001
100-0001