Pentax 14748 Digital Camera User Manual


 
187
Using the Flash
5
Using an External Flash (Optional)
Using an optional external flash AF540FGZ, AF360FGZ, AF200FG or
AF160FC enables a variety of flash modes, such as P-TTL auto flash
mode, depending on the external flash being used. See the chart below for
details.
(z: Available #: Restricted ×: Not available)
*1 Available only when using a DA, DA L, D FA, FA J, FA, F or A lens.
*2 Shutter speed of 1/90 sec. or slower.
*3 When combined with the AF540FGZ or AF360FGZ, 1/3 of the flash discharge can be
output by the built-in flash and 2/3 can be output by the external flash.
*4 Available only when combined with the AF540FGZ or AF360FGZ.
*5 Multiple AF540FGZ or AF360FGZ units, or a combination of an AF540FGZ or AF360FGZ
unit and the built-in flash is required.
Flash
Camera Function
Built-in
Flash
AF540FGZ
AF360FGZ
AF200FG
AF160FC
Red-eye reduction flash zz z
Auto flash discharge zz z
After the flash is charged, the camera
automatically switches to the flash sync
speed.
zz z
Aperture value is automatically set in e
mode and b mode.
zz z
P-TTL auto flash (appropriate sensitivity:
ISO 100 to 3200)
z
*1
z
*1
z
*1
Slow-speed Sync zz z
Flash exposure compensation zz z
AF assist light of external flash × z ×
Trailing Curtain Sync
*2
zz ×
Contrast-control-sync flash mode #
*3
z #
*4
Slave flash × z ×
High-speed flash sync × z ×
Wireless flash #
*4
z
*5
×
Flashes with reversed polarity (the center contact on the hot shoe is minus)
cannot be used due to the risk of damaging the camera and flash.