Pentax 14748 Digital Camera User Manual


 
215
6
Shooting Settings
5
Use the four-way controller
(23) to select [Off], [Low],
[Medium] or [High] and press the
4 button.
6
Press the 3 button twice.
The camera is ready to take a picture.
Enables capturing images at high dynamic range. Takes three images
(-3EV underexposed, standard (proper exposure) and +3EV
overexposed) to create a single composite image with them.
1
Select [HDR Capture] in the [A Rec. Mode 2] menu and
press the four-way controller (5).
The [HDR Capture] screen appears.
When [Highlight Correction] is set to [On], the minimum sensitivity is set to ISO
200. When [3. Expanded Sensitivity] is set to [On] in the [A Custom Setting 1]
menu (p.91), the minimum sensitivity is set to ISO 160.
HDR Capture
HDR Capture is not available in the following situations.
- when the file format is set to [RAW] or [RAW+] (fixed to [JPEG])
- when the exposure mode is set to p (Bulb) or M (Flash X-sync Speed)
When HDR Capture is set, the following functions are not available.
- Drive modes other than 9 (Single Frame Shooting), g (Self-timer (12s)),
Z (Self-timer (2s)), h (Remote Control) or i (Remote Control (3s delay))
- Interval Shooting or Multi-exposure
- Extended Bracketing, Digital Filter or Cross Processing (The function
selected last is used.)
During HDR Capture, multiple images are combined together to create a
single image, so it will take time to save an image.
D-Range Setting
Highlight Correction
Shadow Correction
OFF
OFF
Cancel OK
OK
MENU