Filter
Top Products
196
Playback Functions and Image Editing
6
Developing RAW Images
You can convert captured RAW images into JPEG images, and save them
as new files.
1
Select a RAW image in the single image display, and press the
four-way controller (3).
The playback mode palette appears.
2
Use the four-way controller (2345) to select h (RAW
Development), and press the 4 button.
The screen to select a development method is displayed.
3
Use the four-way controller (23) to
select [Developing a single image],
and press the 4 button.
The parameters saved in the image file
appear.
Proceed to Step 6 if you do not need to
change the parameters.
If there are no images that can be
processed, [No image can be processed] appears.
4
Use the four-way controller (23)
to choose a parameter you want
to change.
You can select a different image by
turning the front e-dial (R).
Only RAW images captured with this camera can be edited. RAW images
captured with other cameras cannot be edited on this camera.
Developing One RAW Image
MENU
OK
OK
OK
Developing a single image
Developing a single image
Developing multiple images
Developing multiple images
MENU
OK
Image Capture Settings
Image Capture Settings
100-0001
100-0001
e_kb524_84percent.book Page 196 Friday, June 15, 2012 12:13 PM