Filter
Top Products
53
4
Taking Pictures
Using the included software (ACDSee™), you can easily join several
images to form one panorama picture. Overlap and stitch the edges of
images taken in Panorama Assist mode and create a panorama image.
1 Press the four-way controller (3) in Capture Mode.
The virtual mode dial is displayed.
2 Press the four-way controller (45) to select [
F
(Panorama Assist)].
3 Press the OK button.
4 Press the four-way controller to set
the shift direction.
4 joins the images at the left.
5 joins the images at the right.
2 joins the images at the top.
3 joins the images at the bottom.
The explanation described below indicates that 5 is set.
5 Take the first image.
Press the shutter release button to take the first
image. The right edge of the image is displayed
in half transparent form at the left of the LCD
monitor.
Taking Panorama Pictures (Panorama Assist
Mode)
Four-way controller
OK button
Shutter release button
Set shift direction
Set shift direction
Set shift direction
100
100
100
11:20
11:20
10/10/2003
10/10/2003
10/10/2003
11:20