Filter
Top Products
56
Taking Pictures
m
Move the camera to right without
changing your stance.
,
Overlap the images.
On the right side of the screen,
the first image will appear in a
semi-transparent state on top of
the second image. Compose the picture so that the first
semi-transparent image is superimposed on the outlines of
the second real image.
.
Press the shutter release button.
The second picture will be taken, and the LCD monitor
screen returns to the state described in
b
. If you continue
shooting, follow the step described in
n
and afterwards.
⁄0
Press the Playback/OK button.
The LCD monitor screen displays both the first and second
images.
• To cancel the 3D image mode, change the 3D image mode
to another Capture mode.
• The display button will not activate in the 3D image mode.
• A clear three-dimensional effect will not be achieved if the two
images are taken in widely different positions (heights) or are
not straight.When taking a person, you are recommended to
ask your model to stay as still as possible and to take the
second picture as quickly as you can. It is easier to take the
pictures if you use a tripod or appropriate base.
• As a guide, the camera should be moved about 1/40 of the
distance between the camera and the subject. For example, if
the subject is 3m away, the distance the camera should be
moved will be 3m÷40=7.5cm.
However, as the way people see three-dimensional images
differs from person to person, there is no need to be too
concerned. Refer to the table below for a simple guide to how
far to move the camera.
memo
1414
1/60
F2.6
1/60
F2.6
Distance to subject
Camera movement
0.1 m
0.5 cm
0.3 m
1 cm
0.5 m
1.5 cm
1 m
2.5 cm
3 m
7.5 cm
5m
13 cm