Filter
Top Products
225
9
Appendix
Messages such as the following may appear on the display when using
the PictBridge function.
Protected The image or sound file you are trying to delete is protected.
Data being recorded
Displayed when you try to switch to Q mode while an
image is still being recorded, or when the protect setting or
DPOF setting is being changed. It disappears after the
image is recorded or the setting is changed.
Data being processed
Displayed when the camera takes more than five seconds
to display an image due to image processing, or when the
SD Memory Card or the built-in memory is being formatted.
Built-in memory full Displayed if the built-in memory is full when saving a file.
No image to be
processed
Displayed when there are no images or sound files.
This image/sound
cannot be processed
Displayed for files that cannot be processed.
No card in the camera Displayed when no SD Memory Card is inserted.
The built-in memory is
not enough to copy
images/sounds
Displayed when there is insufficient built-in memory to
perform copying.
Cannot process
correctly
Displayed when Red-eye Compensation processing fails.
Display image/sound
from built-in memory
Displayed when the camera enters the built-in memory
display.
This image cannot be
registered as a Favorite
The selected image is not suitable for registration as a
Favorite.
No images are available
to register as a Favorite
There are no images suitable for registration as a Favorite.
No image. There are no playable images in the Favorites.
Message Description
Low paper level
in the printer
The paper level of the printer is low.
No paper in the printer There is no paper in the printer.
Paper stuck in the printer The paper is stuck in the printer.
Low ink level
in the printer
The ink level of the printer is low.
No ink in the printer There is no ink in the printer.
Printer error An error message has been sent from the printer.
Data error A data error message has been sent from the printer.
Message Description