Filter
Top Products
31
When using a hood with a 02 STANDARD ZOOM lens, be sure
to use the PH-RBB 40.5mm. If the PH-SBA 40.5mm is used,
vignetting may occur at the wide-angle setting.
Vignetting will occur at the wide-angle setting if the 100 PL
FILTER is used with a 02 STANDARD ZOOM lens.
A K-mount lens can be attached to this camera with the use
of the optional Adapter Q for K Mount Lens. When a K-mount
lens is used, the focal length must be set manually for some
functions such as Shake Reduction, since the focal length
cannot be obtained automatically.
1 Turn the camera off.
2 Attach the adapter and lens to the camera,
and turn the camera on.
The [Input Focal Length] screen appears.
3 Set the lens focal length.
Available operations
When using a zoom lens, select the actual focal length
which the zoom is set to.
4 Press E.
The camera returns to standby mode.
tMemo
• The focal length setting can be changed in [Input Focal
Length] of the A2 menu.
• When the Adapter Q for K Mount Lens is used, the camera
operates in J mode when the capture mode is set to other
than L mode.
• Refer to the Adapter Q for K mount lens manual for details.
About Hoods
About Filters
Using a K-Mount Lens
Cancel
Cancel
Input Focal Length
Input Focal Length
300.0
300.0
200.0
200.0
135.0
135.0
77.0
77.0
55.0
55.0
35.0
35.0
21.0
21.0
15.0
15.0
OK
OK
OK
MENU
0000.0
0000.0
mm
mm
AB
Changes the value of each digit.
CD
Selects a digit.
V
Selects a value from the list.
QS1-SG-EN.book Page 31 Friday, August 8, 2014 8:51 AM