Filter
Top Products
5
0 Green/Delete button (M/L)
Resets the values being adjusted. Also, you can assign
a function to this button.
Press to delete images during playback. (p.25)
a OK button (E)
When the control panel or a menu is displayed, press
this button to confirm the selected item.
b Four-way controller (ABCD)
Displays the Sensitivity, White Balance, Flash Mode
or Drive Mode setup menu. (p.8)
When the control panel or a menu is displayed, use
this to move the cursor or change the item to set.
Press B during playback to display the playback mode
palette. (p.26)
c MENU button (F)
Displays a menu. Press this button while the menu
is displayed to return to the previous screen. (p.9)
d INFO button (G)
Changes the style of the display on the monitor. (p.5, p.7)
When the camera enters capture mode, the subject and the
current shooting function settings are displayed on the monitor.
This state is referred to as “standby mode”. Press G
in standby mode to display the “control panel” and change
settings. (p.8) If you press G while the control panel is
displayed, you can change the type of information displayed
in standby mode.
About the four-way controller
In this manual, each button of
the four-way controller is indicated
as shown in the illustration on
the right.
Monitor Display
Capture Mode
37
37
1/
2000
1/
2000
F2.8
F2.8
1600
1600
37
37
1/
2000
1/
2000
F2.8
F2.8
1600
1600
37
37
G
G
Custom Image
Custom Image
Bright
Bright
Standard Information Display
Standard Information Display
Standby mode
(Standard Information Display)
Shooting Info Display
selection screen
Control panel
QS1-SG-EN.book Page 5 Friday, August 8, 2014 8:51 AM