Filter
Top Products
14
Then uninstall the driver program named “Camera Driver” under the “Add/ Remove
program” from the Windows Control Panel and restart the computer. Reinstall the driver
again.
4. After installing the camera software, the camera is not detected by the software:
x Some PC's have been shipped without the USB port mode enabled. To enable the USB
Port. You must run the system CMOS setup program. This setup program is only available
when you power up the computer. The procedure is different for each system so you will
need refer to your PC manual for more details.
Note: If the “Driver Open Fail” error message pops up when you click the MyCam CIF
application, please refer to the “Driver Fix” document included in the CD-Rom
on how to resolve.
5. To Uninstall the Camera Driver and AvailaSoft Software :
x To uninstall the Camera Driver, go to Control Panel Æ Add/ Remove Programs Æ
MyCam CIF Æ Remove.
x To uninstall the Photo2Album software, go to Windows Start menu --> Programs-->
Photo2Album--> click “Uninstall Photo2Album”, or you can go to Control Panel according to
the above procedure.
Camera Maintenance:
Maintaining your camera will ensure longer life and will minimize the chances of causing
damage to your camera and computer.
x Keep the camera away from moisture and extreme temperature.
x Clean the outside of the camera with a clean, dry cloth.
x Never use harsh or abrasive cleaners or organic solvents on camera or on any of its parts.
x Never disassemble or touch the inside of the camera.
To uninstall Photo2Album
To uninstall camera driver