Philips WV-NW484S Security Camera User Manual


 
34
Connection Examples
Direct connection to a PC
When connecting the camera
directly to a PC, use the Ethernet
cable (Category 5, cross cable).
Network connection via a PoE-compatible hub
When connecting the camera to a network via a PoE-compatible hub, use the Ethernet
cable (Category 5, straight cable).
Important
The monitor is intended solely for checking the view angle during installation or
servicing. It is not intended for recording or monitoring images.
Text displayed on the monitor screen may be clipped depending on the monitor you are
using.
The switching hub or router used must be 10BASE-T/100BASE-TX-compatible.
A separate power supply is required for each network camera. Separate power supplies
are not required when a PoE-compatible hub is used.
Ethernet cable
(category 5, cross cable)
Monitor (for setup adjustments)
Ethernet cable
(category 5, straight cable)
PoE-compatible hub
Ethernet cable
(category 5, straight cable)
Monitor (for setup adjustments)