Filter
Top Products
43
Action at an alarm occurrence
When a "Terminal alarm", "VMD alarm", "Scene change detection alarm" or "Command
alarm" occurs, alarm action is performed according to the setup for that alarm. For further
information about how to set alarms, refer to the Setup Manual.
Alarm type
Action at an alarm occurrence
• Display of the [Alarm occurrence indication] button on the "Live" page (→ Setup
Manual)
Terminal alarm : Alarm action will be performed when the alarm device connected
to the cable is activated.
VMD alarm : Alarm action will be performed when a change (i.e. motion) is
detected in the image in the set VMD area.
* VMD stands for "Video Motion Detector".
Scene change
detection alarm
: Alarm action will be performed when this camera has been
interfered with, for example, when it has been covered with a
cloth or when its direction has been changed.
Command alarm : Alarm action will be performed when a Panasonic alarm notice is
received from a connected device via the network.
The [Alarm occurrence indication] button will be
displayed and will blink on the "Live" page when
an alarm occurs.