Filter
Top Products
MAC address:
Displays the Ethernet MAC address of the WLAN card. Note that user
cannot change it.
Site survey:
Click the “Reload” button. It will refresh information window which list is
the result of a network scan. Access points with a disabled SSID
Broadcast will not appear unless the camera is associated with it.
Interface Select:
“Wired (Ethernet) only” or “Auto – wired if cable connected otherwise
wireless”: Choose wired or wireless mode. However, note that wired is
priority.
Type:
To select one of WLAN modes from Infrastructure or Ad-Hoc mode.
Shows which type of security the network uses. The device supports
three security methods: None, WEP, WPA_PSK/WPA2_PSK
WEP settings:
Authenticatio
n:
Select Open or Shared Key System Authentication,
depending on the method used by your access
point. Not all access points have this option, in
which case they probably use Open System, which
is sometimes known as SSID Authentication.
Security mode:
WEP Mode:
The key types available depend on the access
point being used. The following options are
available:
•ASCII - In this method the string must be
exactly 5 characters for 64-bit WEP and 13
36