Filter
Top Products
Start Time:
Daylight Saving
Stop Time:
Sets up the date and time of daylight saving stop time.
Daylight Saving
Offset:
Sets up the date of daylight saving offset.
3.7.3 Maintenance
Hard Factory Default
(Include the network
setting):
Recall the device hard factory default settings. Note that click
this button will reset all device’s parameters to the factory
settings (including the IP address).
Factory Default (Except
the network setting):
The unit is restarted and most current settings are reset to
factory default values. This action will not reset the network
setting.
Backup Setting: To take a backup of all of the parameters, click this button. If
necessary, it will then be possible to return to the previous
settings, if settings are changed and there is unexpected
behavior.
Restore Setting: Click the “Browse” button to locate the saved backup file and
then click the “Restore Setting” button. The settings will be
restored to the previous configuration.
Firmware upgrade: The device supports new firmware upgrade.
1. Close all other application programs which are not necessary
50