Filter
Top Products
Appendix B: PING IP Address
The PING (stands for Packet Internet Groper) command is used to detect whether a specific IP
address is accessible by sending a packet to the specific address and waiting for a reply. It’s
also a very useful tool to confirm ICA-530 installed or if the IP address conflicts with any other
devices over the network.
If you want to make sure the IP address of ICA-530, utilize the PING command as follows:
z Start a DOS window.
z Type ping x.x.x.x, where x.x.x.x is the IP address of the ICA-530.
The replies, as illustrated below, will provide an explanation to the problem.
If you want to detect any other devices conflicts with the IP address of ICA-530, also can utilize
the PING command but you must disconnect the ICA-530 from the network first.
67