2.2 Physical Details
Identification of ICA-530 cables
RS-485 & DI/DO
(Connect to a TEL box)
12V DC in Line Out
Line InVideo OutRJ-45 LAN
1. RJ45 LAN socket:
Connect to PC or Hub/Switch. For connections to 10Base-T Ethernet or 100Base-TX Fast
Ethernet cabling. This Ethernet port built N-Way protocol can detect or negotiate the transmission
speed of the network automatically. Please use Category 5 “straight through” cable to connect the
ICA-530 to a 100Mbps Fast Ethernet network switch or hub.
Note that, in case you need to connect the device to PC or notebook directly, you should use
cross over cable instead.
2. RS-485 & DI/DO:
Connect to a local keyboard controller and connect to sensor in and alarm out devices
Inside the TEL box:
Name Function
12VDC DC 12V (50mA maximum)
GND GND
D+ RS485 data +
D- RS485 data -
DI Digital signal input
DO Digital signal output
NOTE: The RS-485 of ICA-530 is master that
can control external scanner.
3. Local Video output (BNC port)
The Network Camera also provides composite video output. User can use BNC video cable to
connect the Network Camera with a TV monitor or VCR.
8