Filter
Top Products
Questions?
Contact Polaroid Corporation at
www.polaroiddigitalEU.com
9
English
Changing the flash setting
1. Turn on the camera (a); it is in No
Flash (nF) mode.
2. Press the flash setting button (c) to
change the setting. The LCD status
display (b) shows the new setting.
3. If you turn on the Autoflash (AF) or
Force Flash (FF) setting, the flash
charges for a few seconds. The flash
indicator (d) lights yellow when the flash
is charged and ready to take a photo.
If the flash takes longer than 25 seconds
to charge, the Battery Low icon (bL) appears on the LCD status display and the flash stops
charging. You need to replace the camera batteries to use the flash (see page 4 to replace
batteries).
Note: If the camera detects the Battery Low condition when you turn it on, the flash does
not charge.
Note: If the camera is not used within 45 seconds after the flash is fully charged (or 45
seconds after the Battery Low icon appears), the camera enters sleep mode.
a
b
cd
640SEcdqs.book Page 9 Tuesday, December 5, 2000 4:46 PM