Polaroid PDC 1050 Digital Camera User Manual


 
12
Polaroid PDC 1050 Digital Camera User Guide
www.polaroid-digital.com
13
Polaroid PDC 1050 Digital Camera User Guide
www.polaroid-digital.com
Indoor Pictures
• Setting Flash Mode
The Flash Range is approximately 3 to 6 feet (1 to 2 metres).
1. Turn on the camera.
2. Set the camera to
mode.
3. Press button to cycle through the Flash Mode until the one you want
is shown on the LCD screen.
Flash Mode on, the ash res for every picture. Use this setting in
high-contrast situations to provide ll-light or use it indoors in low
light.
Flash Mode off, the ash does not re. Use this setting for outdoor
pictures or where ash is prohibited or may be distracting. Also use
when shooting toward a reective surface, such as a window or
mirror. If you do not have enough light when using this setting, your
pictures will be too dark.
A
Auto Flash Mode, the ash res automatically as needed. Use this
setting to take most pictures.