Filter
Top Products
41
The live picture in
the LCD looks
"jumpy."
• The LCD is being used in low light conditions.
Increase the amount of light, or use the optical
viewfinder to compose your photo.
The flash doesn’t
work.
• The flash is turned off. Press the Menu Dial to
change the flash setting. Use the Autoflash
setting for best results.
• The camera is set to the Autoflash setting. The
autosensor determined that there was sufficient
light in the setting to take a photo without the
flash.
My photo looks
blurry.
• The subject of your photo moved while the
photo was being taken. Remember to have your
subjects remain still while a photo is being taken.
• The digital camera moved while the photo was
being taken. Hold the camera steady while taking
a photo, or use a tripod. There is a tripod mount
on the bottom of the camera.
• The wrong focal setting was used. Press the
Menu Dial to change the focal setting in the LCD
menu. Use the Autofocus (AF) setting for best
results.
Problem Solution