Filter
Top Products
24
Polaroid PDC 5350 Digital Camera User Guide
www.polaroid-digital.com
25
Polaroid PDC 5350 Digital Camera User Guide
www.polaroid-digital.com
• Setting Flash Mode
1. Turn on the camera by sliding and holding the Power Switch in the
arrow direction shown near the switch for 2 seconds.
2. Set the Camera in Auto or A/S/M mode.
3. Press the Flash button to cycle through the ash settings and select
the one you need.
When you press the Flash button, the Flash Charge LED will blink in red,
which indicates the ash is charging. The icon (according to the ash
setting you selected) will appear on the LCD screen. You can now take
pictures using the Flash mode you selected. The ash will recharge after
each ash picture.
Flash Range:
• Wide: 2.6 ~ 9 feet (0.8 ~ 2.7 metres)
• Telephoto: 2.6 ~ 6.7 feet (0.8 ~ 2.0 metres)
The camera has six ash modes (default setting is Auto). Use the ash
when you take pictures at night, indoors, or outdoors in heavy shadows.
A
Auto Flash Mode. The ash res automatically as needed. Use this
setting to take most pictures.
Flash Mode on. The ash res for every picture. Use this setting in
high-contrast situations to provide ll-light or use it indoors in low
light.
Flash Mode off. The ash does not re. Use this setting for outdoor
pictures or where ash is prohibited or may be distracting. Also use
when shooting toward a reective surface, such as a window or
mirror. If you do not have enough light when using this setting, your
pictures will be too dark.
Red-eye reduction. The ash res automatically as required by the
lighting level, and the ash pre-strobes before shooting to reduce
red-eye phenomenon.