Filter
Top Products
- 21 -
• To select a photo for viewing:
Press the thumbnail ( ) button to
display a menu of nine preview images.
A number at the bottom right corner
of each preview gives the position of
the photograph in memory. If there
are more than nine photos in memory,
use the command dial to page through the previews, nine at
a time. Use the ▼W/T▲ buttons to highlight the photo you
want to view, then press the thumbnail button again to view
it at full size.
3 View the information for the current pho-
tograph. When first displayed, photo-
graphs are shown with the following infor-
mation: the time of recording, image qual-
ity and size, folder name, file number and
type (JPEG or TIFF), the total number of
shots that can be played back, and a frame
number giving the position of the current
photograph in memory. Other informa-
tion can be displayed by turning the com-
mand dial.
4 If desired, you can zoom in on the current
photo by pressing the button. The
center portion of the image will be en-
larged to fill the LCD monitor. Press the
button once for a magnification of
×2, twice for a magnification of ×3. Other
sections of the image can be viewed by turning the command
dial; a map of the image appears at top left, showing the present
position. Press the button a third time to view the
photograph at full size.
5 The image currently displayed can be
deleted by pressing the button. This
button can also be used to delete the
thumbnail currently selected in the pre-
view list. Note that once deleted, photos
cannot be recovered; be sure to make
copies of any photographs you wish to
keep, prior to deletion.
99.04.14
15:05
NORMAL
VGA
100NIKON
0015.JPG
[ 17/ 17]
This dialog appears when
the button is pressed.
Highlight YES using the
▼W/T▲ buttons, then
press the shutter-release
button to delete the se-
lected photograph. Select
NO to return to playback
mode leaving the photo-
graph untouched.
AUTO
DELETE
1 IMAGE
DELETE
YES
NO
Date and time
of recording
Folder
File no. and
type
Image size
and quality
Frame no./
total frames
visible
Using the Buttons (PLAY)