Filter
Top Products
- 34 -
CONCEPT
PRACTICE
➔
AUTO
SHOOTING
SET UP
FOLDERS
LENS
CARDFORMAT
AE LOCK
1
USER SET
RESET ALL
AUTO
USER SET
BSS
A U T O
User Settings
In M-REC mode, the camera can “memorize” up to three
combinations of settings, including metering, white balance, multi-
shot, image adjustment, best-shot selection, digital zoom, lens
converter, and autoexposure/white-balance lock. These settings
can be restored by selecting the settings number from the USER
SET menu. Any changes to settings will be automatically saved
under the current settings number.
By default, any changes made to settings in M-REC mode are
automatically saved as Settings Number 1. These settings are
restored whenever the mode dial is set to M-REC. To select a
different combination of settings:
1 Turn the mode dial to M-REC.
2 Press the MENU button to display the M-
REC menu, then press it again to view the
second page.
3 Using the zoom buttons, highlight USER
SET.
4 To change the setting, either
• rotate the command dial (press the
MENU button to return to shooting
mode), or
• press the shutter-release button to
display a list of the settings saved under
the selected settings number. The
settings number can then be changed
by pressing the zoom buttons. After
selecting the desired settings number,
press the shutter-release button.
Any changes to settings made in M-REC mode will be saved under
the new settings number.
The Camera Menus: The M-REC Menu