Filter
Top Products
masterpage:Left
filename[D:\MVC-CD1000 kaihan\3062473121\3062473121MVCCD1000UC\02GB-
MVCCD1000UC\10add.fm]
68
model name1[MVC-CD1000]
[3-062-473-12(1)]
Troubleshooting
If you experience trouble with your camera, first check the following items. Should
your camera still not operate properly after you have made these checks, consult your
Sony dealer or local authorized Sony service facility. If code displays (C:ss:ss)
appear on the LCD screen or on the viewfinder, the self-diagnosis display function is
working (page 73).
Symptom Cause and/or Solution
Your camera does not
work.
• You a r e n o t u s i n g an “InfoLITHIUM” battery pack.
tUse an “InfoLITHIUM” battery pack (page 8).
• The disc is not inserted properly.
tRemove the disc, and insert it again (page 14).
• The battery level is too low. (The indicator
appears.)
tCharge the battery pack (page 9).
• The AC power adaptor is not connected securely.
tConnect it securely to the DC IN jack and a wall
outlet (mains) (page 9, 11).
• The malfunction occurs inside the camera.
tTurn off the power, and turn on after one
minute, then check that the camera works
properly.
Your camera cannot
record images.
• The PLAY/STILL/MOVIE selector is set to PLAY.
tSet it to MOVIE or STILL (page 18, 24).
• No disc has been inserted into your camera.
tInsert a disc (page 14).
• The disc has not been initialized.
tInitialize the disc (page 14).
The picture is noisy. • Your camera is placed near a TV or other
equipment that uses strong magnets.
tMove your camera away from the TV, etc.
The picture is too dark. • You are shooting a subject with a light source
behind the subject.
tAdjust the exposure (page 53).
• The brightness of the LCD screen is too low.
tAdjust the brightness of the LCD screen
(page 20).
01cov.book Page 68 Wednesday, July 19, 2000 10:33 AM