Filter
Top Products
masterpage:Right
filename[D:\MVC-CD1000 kaihan\3062473121\3062473121MVCCD1000UC\02GB-
MVCCD1000UC\10add.fm]
Additional information
69
model name1[MVC-CD1000]
[3-062-473-12(1)]
The flash does not work. • The flash is set to .
tSet the flash to (no indication), , or
(page 22).
• The camera is in one of the following PROGRAM
AE modes: Twilight, Twilight plus, or Landscape.
tCancel the PROGRAM AE function or set the
flash to (page 22, 51).
• The PLAY/STILL/MOVIE selector is set to
MOVIE.
tSet it to STILL.
• The flash is not popped up.
tPopuptheflash(page22).
The date and time are
recorded incorrectly.
• The date and time are not set correctly.
tSet the correct date and time (page 12).
Vertical streaks appear
when you are shooting a
very bright subject.
• This is called the smear phenomenon.
tThis is not a malfunction.
The battery life is short. • You are recording/playing back images under
extremelycoldtemperatures.
• The battery pack is not charged enough.
tCharge the battery pack fully.
• The battery pack is dead.
tReplace the battery pack with a new one.
The indication of the
battery remaining time is
not proper.
• You are using the camera for many hours under
extremely hot or cold temperatures.
• The battery pack is dead.
tReplace the battery pack with a new one
(page 8).
• The battery level is too low.
tInstall the charged battery pack (page 8, 9).
The power is immediately
turned off even if the
battery remaining
indicator indicates that the
battery level is sufficient.
• —
tCharge the battery pack about one hour after the
normal charge is complete (page 9).
The zoom does not work. • PROGRAM AE is set to the Panfocus mode.
tCancel the Panfocus mode (page 51).
Digital zoom does not
function.
• You cannot use digital zoom to record moving
pictures.
Symptom Cause and/or Solution
01cov.book Page 69 Wednesday, July 19, 2000 10:33 AM