Filter
Top Products
Other Information
Chapter 6 77
The date and time displays disappear.
If you remove the power source from the camcorder while the power is on, all settings
and selections are erased. Make sure to turn the camcorder’s power off before
disconnecting the power source.
The wrong date and time are displayed/recorded.
If you have not performed Date/Time Setting (see page 22), the date and time are not
displayed/recorded correctly. Be sure that Date/Time setting is carried out.
The tape won’t eject.
The battery pack is running low.
If the LCD monitor is not open more than 60˚, the EJECT switch does not function.