Ricoh 06493 Digital Camera User Manual


 
3
50
Shooting
4 Press F.
The camera returns to standby mode.
t Memo
The following settings for autofocus operation can be set
in the E3 menu.
In [18 Hold AF Status], you can set whether to immediately
reactivate autofocus or to maintain the focus for a certain
amount of time before activating autofocus when the subject
happens to move out of the selected focusing area after being
focused. The default setting is to immediately activate
autofocus when focusing is unsuccessful.
•In S mode, [AF Mode] is fixed to x or y depending
on the set scene. (p.88)
•In R mode, [AF Mode] is fixed to z.
1 Press G in standby mode.
2 Select [AF Active Area] and press E.
The [AF Active Area] screen appears.
3 Select the desired focus
point selection mode
and press E.
The control panel reappears.
15 AF.S Setting Focus-priority, Release-priority
16 1st Frame Action
in AF.C
Release-priority, Auto, Focus-priority
17 Action in AF.C
Continuous
Focus-priority, Auto, FPS-priority
18 Hold AF Status Off, Low, Medium, High
Selecting the Focusing Area (AF Point)
v/A1
6
Auto (11 AF
Points)
Out of the 11 AF points, the camera
automatically selects the optimum
focusing area.
7
Auto (5 AF
Points)
Out of the 5 AF points, the camera
automatically selects the optimum
focusing area.
E
Select
Sets the focusing area to the user
selected point from 11 points.
8
Expanded
Area AF
Sets the focusing area to the user
selected point from 11 points. When
the subject happens to move out of the
selected focusing area after being
focused, 8 peripheral points are used
as back-up points.
Not available in x mode.
D
Spot
Sets the focusing area to the center of
the 11 points.
AF Active Area
AF Active Area
Auto (11 AF Points)
Auto (11 AF Points)
Cancel
Cancel
OK
OK
e_kb558_om.book Page 50 Tuesday, September 16, 2014 11:59 AM