Filter
Top Products
3
59
Shooting
Available operations when shooting with the viewfinder
Proceed to Step 6 if you do not need to change
the parameters.
3 Press G.
The parameter setting screen appears.
4 Set the parameters.
Available operations
5 Press E.
The screen of Step 2 reappears.
6 Press E.
The control panel reappears.
7 Press F.
The camera returns to standby mode.
u Caution
• This function is not available when in R, S, or W
mode.
The outcome of Cross Processing varies each time a picture
is taken. If you take a cross processed image that you like,
you can save the Cross Processing settings used in the image
so that you can repeatedly use the same settings.
1 Press B in single image display of playback mode.
The playback mode palette appears.
2 Select j and press E.
The camera searches for cross processed images starting
from the most recent image taken.
[No cross processed image] appears if there are no cross
processed images.
3 Use V to select a cross
processed image.
4 Select the “Favorite” number 1, 2 or 3 to save
the settings, and press E.
The settings of the selected image are saved as your
“Favorite” settings.
M
Uses Digital Preview to preview the background
image with the selected setting applied.
J
Saves the preview image (only when the image
can be saved).
AB
Selects a parameter.
CD
Adjusts the value.
V
Switches between [Sharpness] and [Fine
Sharpness]. (Not available in C mode)
M
Resets the adjustment value to the default
setting.
Saturation
Saturation
Cancel
Cancel
OK
OK
Saving the Cross Processing Settings of a Captured
Image
100-0001
100-0001
Saves this image's Cross
Saves this image's Cross
Processing settings
Processing settings
Save as Favorite 1
Save as Favorite 1
Save as Favorite 2
Save as Favorite 2
Save as Favorite 3
Save as Favorite 3
Cancel
Cancel
OK
OK
e_kb558_om.book Page 59 Tuesday, September 16, 2014 11:59 AM