Ricoh 06493 Digital Camera User Manual


 
3
52
Shooting
The control panel reappears.
4 Press F.
The camera returns to standby mode.
If you selected g or h in Step 3, proceed to Step 5.
5 Press and hold E.
6 Select the AF area.
Use the frame that appears on
the monitor to change the
position and size of the AF area.
Available operations
7 Press E.
The AF area is set.
u Caution
When f is selected, the focus lock operation (composition
adjustment with the half press of 0) does not work.
t Memo
When set to j, the number of faces detected can be
confirmed by the number of lit grip lamps (0 to 5).
To change the setting from the menu, set in [Contrast AF]
of [Live View] in the A3 menu.
When [Focus Peaking] is set to [On] in the control panel or
[Live View] of the A3 menu, the outline of the subject in
focus is emphasized and makes it easier to check the focus.
This function works in both v and w modes.
h
Select Sets the focusing area by the pixel.
i
Spot
Sets the focusing area to a limited area
at the center.
ABCD
Changes the position of the AF area.
V
Increases/reduces the size of the AF
area (when g is selected).
M
Returns the AF area to the center.
OK
OK
e_kb558_om.book Page 52 Tuesday, September 16, 2014 11:59 AM