Filter
Top Products
3
43
Shooting
t Memo
• The settings for exposure can be specified in increments
of 1/3 EV steps. In [1 EV Steps] of the E1 menu, you can
change the adjustment steps to 1/2 EV steps.
• A proper exposure may not be obtained with the selected
shutter speed and aperture value when the sensitivity
is set to a certain sensitivity.
•In L mode, the difference from the proper exposure is
displayed on the EV bar scale while exposure is adjusted.
•In M mode, [Drive Mode] cannot be set to [Continuous
Shooting] or [Exposure Bracketing].
• You can set the function of the M button for when the camera
is in L/K mode. Set in [Button Customization]
of the A4 menu. (p.79)
• When shooting with a low shutter speed, you can reduce
image noise from the control panel or [Slow Shutter Speed
NR] of the A2 menu.
The compensation value can be set between -5 and +5 EV
(-2 and +2 EV in C mode).
1 Press J, and then turn V.
e and the compensation value
are displayed on the status
screen, Live View screen, and in
the viewfinder during adjustment.
Available operations
Auto
Applies Noise Reduction according to the shutter
speed, sensitivity, and internal temperature of
the camera.
On
Applies Noise Reduction when the shutter speed
is slower than 1 second.
Off
Does not apply Noise Reduction at any shutter
speed.
Checking the Depth of Field (Preview)
When [Optical Preview] or [Digital Preview] is assigned to M
in [Green Button] of [Button Customization] in the A4 menu,
you can check the depth of field before taking pictures.
(p.77)
EV Compensation
J
Starts/ends adjusting the compensation value.
M
Resets the adjustment value to the default
setting.
1/
1/
250
250
1600
1600
F
F
5.6
5.6
99999
99999
e_kb558_om.book Page 43 Tuesday, September 16, 2014 11:59 AM