Filter
Top Products
3
54
Shooting
• The Shake Reduction function is automatically turned off
when Self-timer or Remote Control is selected.
• When the drive mode that employs the self-timer or remote
control is selected, exposure may be affected by the light
entering through the viewfinder. In such a case, use the
AE Lock function. (p.44)
1 Press D in standby mode.
The Drive Mode screen appears.
2 Select Z and press B.
3 Select Z or b and press E.
The camera returns to standby mode.
t Memo
•In x mode, the focus position is locked in the first frame.
1 Press D in standby mode.
The Drive Mode screen appears.
2 Select O and press B.
3 Select O or P and press E.
The camera returns to standby mode.
4 Press 0 halfway, then fully.
The grip lamps blink.
When the remaining time for the timer becomes 5 seconds
or less, the number of blinking grip lamps changes in order
from 5 to 0, according to the number of seconds remaining.
The shutter will be released about 12 seconds or
2 seconds.
Continuous Shooting
Continuous Shooting (H)
Continuous Shooting (H)
Cancel
Cancel
OK
OK
Self-timer
Self-timer (12 sec.)
Self-timer (12 sec.)
Cancel
Cancel
OK
OK
e_kb558_om.book Page 54 Tuesday, September 16, 2014 11:59 AM